Key Features of the HPA-1
The HPA-1 delivers true world-class performance at a very attractive price. It provides up to 1.0 W (1000 mW) of output power at ultra-low harmonic distortion, exceptionally low intermodulation distortion, with an ultra-low noise floor. It is mainly due to its exemplary performance on these parameters that the HPA-1 is able to reproduce the music exactly like the artists and recording engineers intended.
The ultra-low distortion results in a clean and crisp sound. This is especially evident in the rendition of instruments that challenge many ordinary amplifiers. This includes instruments such as cymbals, hi-hats, snare drums, and saxophones, which the HPA-1 renders superbly. The ultra-low distortion design of the HPA-1 also allows you to hear the sounds normally only experienced in live performances, such as the body cavity resonance of an acoustic guitar on the leading edge of the string attack.
It is noteworthy, that high levels of intermodulation distortion have been associated with the activation of the fight-or-flight response in humans. Thus, it stands to reason that a low level of intermodulation distortion is crucial to a pleasant listening experience. This is another area where the HPA-1 excels. Thanks to its extremely low intermodulation distortion – in particular on multi-tone tests – the HPA-1 renders the music with incredible realism and an amazing sound stage without resulting in listening fatigue.
Finally, the ultra-low noise floor of the HPA-1 is responsible for the complete absence of sound during pauses in the music – even when used with sensitive in-ear modules.
The HPA-1 is designed and manufactured in Canada. The raw circuit board is made in Ontario. The PCB assembly is performed in Calgary. The chassis is made in Japan with some mechanical parts sourced locally from Calgary.
|Output Power||1.0 W||20 Ω|
|Output Power||1.0 W||32 Ω|
|Output Power||250 mW||300 Ω|
|Total Harmonic Distortion (THD)||< -130 dB||300 Ω, 100 mW, 1 kHz|
|Total Harmonic Distortion + Noise (THD+N)||
|300 Ω, 100 mW, 1 kHz|
|Intermodulation Distortion (IMD)||< -112 dB||18+19 kHz @ 1:1, 300 Ω, 100 mW|
|Multi-Tone Intermodulation Residual||<- 140 dBr||AP 32-tone, 300 Ω, 100 mW|
0 dB (1x)
+12 dB (4x)
|Selectable by switch|
|Input Sensitivity||2.8/0.7 V RMS||Low/High Gain, 32 Ω, 200 mW|
|Output Impedance||35 mΩ||1 kHz|
|Channel Separation||95 dB||1 kHz|
|Dynamic Range (AES17)||130 dB|
|Signal-to-Noise Ratio||132 dB|
|Residual Mains Hum & Noise||1.25 µV RMS||A-weighted|
|Mains Voltage Requirements||
80–264 V AC
|Size||140 x 55 x 210 mm||(W x H x D)|
|Designed and Manufactured in Canada|